QKSC Dry type core starting reactor

I.General description

QKSC Dry type core starting reactor can reduce the starting current of large AC asynchronous motor, connect the starting reactor and motor in series to increase the equivalent impedance of motor starting circuit to reduce the starting current and reduce the impact on power grid. The starting process of AC motor is very short (usually a few seconds to two minutes). After starting, the reactor or autotransformer for step-down starting will be cut off. This product is a starting reactor designed according to the starting characteristics of 6kV or 10kv High-voltage Asynchronous Motor, and its application range is 220kw-1400kw. Various starting reactors can also be designed according to the specific motor model and requirements of users.

II.Structure feature

The core of the reactors is made of silicon steel sheets stacked into three column core structure. The core column is circular section, and the yoke is inverted D-shaped section. There are several air gaps on the three core pillars making the core column divided into several core cakes. The air gap plate and core cake are tightened by the tightening screw on the upper and lower yokes. The reactor winding is cylindrical, wound with high-strength electromagnetic wire and treated by cast resin in vacuum, combined into a whole body, and has a tap whose reactance value is 85% of the rated reactance value.

III. Standard

GB / t10229-1988 reactor

IEC289-1987 reactor

Gbl094.3-2003 "part 3: Insulation levels, insulation tests and external insulation air gap"

IV. Model meaning

V.Enviroment

1.The altitude shall not exceed 1000m;

2. The operating environment temperature is - 25 ℃ to + 45 ℃, and the relative humidity is not more than 90%;

3. There is no harmful gas and inflammable and explosive materials around;

4. The surrounding environment should be well ventilated.

VI.Technical parameter

QKSC-6kVstarting reactor parameters

Model	Rated Capacity (Kvar)	Motor Power (KW)	Size (mm)
Model	Rated Capacity (Kvar)	Motor Power (KW)	L	W	H	A	E
QKSC-400/6	400	220	920	350	910	640	280
QKSC-450/6	450	250	920	350	910	640	280
QKSC-500/6	500	280	920	350	910	640	280
QKSC-550/6	550	315	950	350	940	660	280
QKSC-630/6	630	355	980	350	970	680	280
QKSC-700/6	700	400	990	400	980	690	255
QKSC-800/6	800	450	990	400	980	690	320
QKSC-850/6	850	500	1010	400	1000	700	320
QKSC-1000/6	1000	560	1010	400	1000	700	320
QKSC-1100/6	1100	630	1030	400	1020	710	320
QKSC-1250/6	1250	710	1050	400	1255	730	320
QKSC-1400/6	1400	800	1070	400	1060	740	320
QKSC-1600/6	1600	900	1070	400	1350	740	320
QKSC-1900/6	1900	1000	1220	450	1210	770	360
QKSC-2100/6	2100	1120	1230	450	1520	780	280
QKSC-2300/6	2300	1250	1260	450	1525	800	360
QKSC-2600/6	2600	1400	1280	450	1270	810	360

QKSC-10kVstarting reactor parameters

Model	Rated Capacity (Kvar)	Motor Power (KW)	SIZE (mm)
Model	Rated Capacity (Kvar)	Motor Power (KW)	L	W	H	A	E
QKSC-400/10	400	220	1000	350	1035	700	280
QKSC-450/10	450	250	1000	350	1095	700	280
QKSC-500/10	500	280	1010	350	1100	710	280
QKSC-550/10	550	315	1040	350	1130	730	280
QKSC-630/10	630	355	1060	350	1140	740	280
QKSC-700/10	700	400	1070	400	1145	750	255
QKSC-800/10	800	450	1070	400	1180	750	320
QKSC-850/10	850	500	1090	400	1190	760	320
QKSC-1000/10	1000	560	1120	400	1195	780	320
QKSC-1100/10	1100	630	1130	400	1210	790	320
QKSC-1250/10	1250	710	1150	400	1250	800	320
QKSC-1400/10	1400	800	1180	400	1260	820	320
QKSC-1600/10	1600	900	1180	400	1515	820	320
QKSC-1900/10	1900	1000	1310	450	1550	830	360
QKSC-2100/10	2100	1120	1320	450	1565	840	360
QKSC-2300/10	2300	1250	1340	450	1590	850	360
QKSC-2600/10	2600	1400	1370	450	1585	860	360